Withstand voltage 4kV double layer polyimide-fluorine 46 composite film wrapped round copper wire

How to check the Enameled Copper Wire
Check the color.
Pinch softness: the pure copper enameled wire has good ductility, if it is soft, it is pure copper enameled wire.
Check the packaging.

Pin hole test is to find insulation defects after treatment with a salt water solution.
A wire specimen approximately 1,5 m in length is taken for conductors of nominal diameter less than 0,07 mm, and pproximately 6 m in length for conductors of nominal diameter equal to 0,07 mm or more.

Brand Name: LP Magnet Wire
Thermal Class: 130-220C
Standard: IEC,NEMA,GB,JIS
Bobbin: 30kg/50kgWooden Spool
Delivery time: 7-30 Days
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Thermal Class: 130-220C
Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Diameter: 0.025mm–4.6mm
Certification: SGS,UL,ISO9001,ISO4001
Insulation: PEW, PIW, EIW, AIW, EI/AIW

Type: insulated
Thermal Class: 130-220C
Delivery time: 7~20 days
Standard: GB IEC JIS NEMA
Brand Name: LP Magnet Wire

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA
Spool materials: plastic, wooden.
Packing:PT-4 plastic spool,carton case
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

There is ‘copperweld’ wire which is an iron core for more strength coated with copper for lower resistance than the iron. This is preferred for antennas for its strength. Purer copper wire will break more often, HOWEVER, I had a really pure (Oxygen free), bare copper wire up for about 5-6 years before it broke, and one with thick plastic insulation for 8-10 years, so it is hard to predict.

Factory Price QA-1 155 0.3mm Enameled Coil Wire For Motor Winding is also called UEW copper winding wire is made by coating heat-resistant insulating varnish on the surface of copper conductors and baking and curing. The main component of the insulating paint film is heat-resistant polyurethane resin.

Enamelled Copper Wire is useful for building transformers, motors, inductors, hard disk actuators, speakers, electromagnets etc. The enamelled copper wire is electrolytically-refined copper.

Enamelled Rectangular Copper Wire is one of magnet copper wire used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers.
Diameter: thickness: 1-10mm; width:1-22mm

Temper: Soft(O), Hard(H)
Grades: Cu-ETP/ C-11000/ E-Cu58
Standard: ASTM, EN 13599, GB-T 18813-2002
Specification: Thickness: 0.1-4.0mm Width: 20-1500mm

Conductor Type: Solid
Conductor Material: Copper
Bobbin: PT-4–PT-200
Standard: IEC,NEMA,GB,JIS
Certification: SGS,UL,ISO9001,ISO4001
Product name: Enameled Copper Wire

The acetal enameled wire has two thermal grades: 105 and 120. It has good mechanical strength, adhesion, resistance to transformer oil and refrigerant, and only a small amount is used for windings of oil-immersed transformers and oil-filled motors.

Polyesterimide/polyamide composite enameled wire, thermal class 180. This product has good thermal shock resistance, high softening and breakdown temperature, excellent mechanical strength, and good solvent and refrigerant resistance. It is used in dry-type power transformers, etc. Winding.

What is the enamelled copper wire? The enamelled copper wire is a wire which has been electrolytically refined; the layer is made from tough polymer materials. As these wires have coating on them they are also called magnet wires.

Rectangular Bar
Width 9.53 mm. up to 305 mm.
Thickness 2.5 mm. up to 100 mm.
Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 μΩcm
Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m
Density 8.91 g/cm3
Melting Point 1083 °C
Excellent Corrosion Resistance

Shape: Round
Brand Name: LP
Conductor Type: Solid
Delivery time: 7-30days
Size: 0.025mm-4.5mm
Thermal Class: 130-220C

Why is Enameled Copper Wire Widely Used? Most of equipment of our lives need the generator, transformer, mobile, computer, etc. All of the machine need the winding coil which need the copper magnet wire or aluminum enameled wire. So the enameled wire is important for life.

Introduction
200-grade thick varnished polyester yam polyamide-imide composite enameled rectangular copper wire (Q(ZY/XY)B-2/200), which belongs to the enameled wire under the winding wire classification.

Model and name
Q(ZY/XY)B-2/200, 200-grade thick varnished polyester-polyamide-imide polyamide-imide composite enameled rectangular copper wire.

IEC Standard High Thermal Class 180 200 220 Enameled Copper Round Wire
Straight welding modified polyurethane enameled copper wire (SEIW)
Polyesterimide enameled copper wire (EIW)
Amide-imide coated polyester enameled copper wire (EAIW)
Polyimide enamelled copper (AIW)
Used for High-voltage coils, relays, transformers, hand machine motors, electronic coils, Motors, steam coils, dry-type transformers, hand tool armatures, cold coal compressors, etc.

Kapton Insulated Copper Wire For Oil Immersed Transformer has heat resistance, excellent chemical stability, high temperature resistance, toughness, abrasion resistance, flame retardancy, electrical insulation, etc.
Kapton Insulated Copper Wire can be used as enameled wire paint, motor winding impregnating paint, etc. It is of great significance to the electrical industry. Enameled wire is an important material for small and medium-sized motors and electrical equipment. At present, the requirements for heat resistance and thermal stability of enameled wire insulation are particularly high. Because electrical equipment needs to operate at high temperatures. Improve the reliability of overload and increase the unit power of electrical equipment. The application of polyimide in this area can significantly improve the insulation capacity of the motor.

Type: insulated
Brand Name: LP
Thermal Class: 130-220C
Standard: IEC, NEMA,GB
Delivery time: 10-30 days
Size: a:0.1-0.6;b:0.2-6.0mm
Conductor Material: Copper

High Thermal Class Motor Winding Awg 14 Enameled Copper Wire is a new type of electromagnetic wire that uses copper as the inner conductor. Its characteristics are between copper and aluminum, combining the excellent conductivity of copper and the light weight of aluminum. Copper enameled wire can be used for signal transmission, but it is prone to problems when used for power transmission, and the life of its products will be greatly reduced. In fact, in the use of copper enameled wire, pay attention to the oxidation protection of the cut surface of the lower enameled wire to ensure the effective combination of copper and aluminum, which can be used for a long time.

Product Name£º4 gauge copper wire
Type: large size round type
Round Dimension:4 gauge or 5.19mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.

Application: Power motors, hermetic groups, transformers, electro-brakes
CHARACTERISTICS
High temperature resistant
Excellent resistance to chemical agents
Very good winding ability
STANDAR PACKAGING
Reel (lost packaging):
DIN 200 – 12 Kg approximately up to ? 0.95 mm included
DIN 250 – 22 Kg approximately from ? 1 mm up to 2 mm inclusive
DIN 355 beyond
Other packaging on request

Conductor: Copper
Certificate: UL
Dimension: Thickness(a)/Width(b):0.45-6mm
Insulation Thickness: G1,G2 or single build, heavy build
Thermal Class: 120(Class E), 180(Class H), 200(Class C), 220(Class C+), 240(Class HC)
Packing:30kg-150kg ply-wood spool(250*400 / 250*500/ 250*600/ 250*730)

The 130L thin paint film polyester enameled round copper wire (QZ-1/130) belongs to the enameled wire under the winding wire classification.

Model and name
QZ-1/130, 130L thin paint film polyester enamelled round copper wire.

130 Degree 0.28 UEW Standard Enamelled Soldering Copper Wire is made of a grease insulating film with Polyester-thane resin as the main body by baking paint on the conductor; its biggest feature is that it can be directly soldered and the heat resistance class is 130¡ãC (Class B).

Special Copper Winding Magnet Wire Used For Automotive Sensors
Stranded enameled copper wire (LITZ)
Self-fusing enameled copper wire (R*-SB)
Polyester enameled copper wire with amide imide coating (FEAI)
Used for high-frequency coils, width coils, induction cooker coils, high-frequency power supplies, etc.

Product Name£º12awg copper wire
Type: round type or rectangular type
Conductor Material£ºCopper
Enameled copper wire Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Elctric types: copper cable wire, welding wire, copper rod, copper strip, stranded copper wire etc.
Certificate£ºUL,RoHS

Product Name£ºcopper winding wire sizes 0.75mm
Type: round and rectangular copper wire
Round Dimension:0.75mm
Conductor Material£ºCopper
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºUEW, QZ, QZY, EIW, etc.
Thermal Class:105 ¡ãC, 120 ¡ãC, 140 ¡ãC, 155 ¡ãC, 180 ¡ãC, 200 ¡ãC, 220 ¡ãC, 240 ¡ãC