Industry wholesale fiber glass covered aluminum flat wire

LP Industry is a Insulated Winding Aluminum Wire Manufacturer in China, Mainly produce UL certificate RoHS round aluminum enameled wire and flat aluminum magnet wire used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers. Normaly we also produce the 0.016-7mm enameled round copper wire and flat copper wire.

Product Name:enameled aluminum copper wire
Type: flat wire
Round Dimension:28 Gauge
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas: QZ
Thermal Class:155¡æ

Product Name£º130/155/180 Degree Aluminum Magnetic Wire
Type: round and rectangular type
Round Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Conductor Material£ºAluminum
Application£ºused for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate£ºUL,RoHS
Insulation Materilas£ºPVF, EIW, AI-EIW, AIW, etc.
Thermal Class:130, 155, 180

180H Rectangular Flat Aluminum Winding Wire For Electric Tools is a wire drawn from a round aluminum rod through a mold of specifications or extruded, and the drawn bare wire is annealed and softened, and then painted and baked for many times. Mainly used in the windings of electrical equipment such as transformers and reactors.

Enameled aluminum wire
Diameter: 0.8-8mm
Temperature Class : 180 , 200 , 220
Standard : IEC 60317-0-2 ,IEC 60317-29 , MW36-A
UL NO : E345303
Bobbin :150kg wooden spool , plastic spool .
Application : Transformer , generator , refrigeration system 

Zhengzhou LP Industry Co.,LTD can manufactures aluminum Magnet Wire, round aluminum wire and rectangular aluminum wire, especially the large size flat aluminum wire, adopt the advanced enameling machine and painting machine

LP Industry does elongation test
2UEW PT-10 Class 180 Enameled round aluminum wire
the elongation is qualified about 24% -28% by IEC 60815.
Dimension: AWG12
Elongation is the ratio of the increase in length to the original length, expressed as a percentage. On an extensometer or tensile testing machine, stretch a straightened sample with a free test length of 200mm-250mm to the breaking point of the conductor at a rate of (5+1) mm/s, and calculate the linear increase in length at break and The ratio of the free test length is expressed as a percentage. Three samples are measured, the three test values are recorded, and the average value is taken as the elongation at break.

Composition of Polyester Enameled Aluminum Winding Wire
Polyester Aluminum Magnet Wire consists of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. It is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by many factors such as the quality of raw materials, process parameters, production equipment, and the environment. Therefore, the quality characteristics of various enameled wires are different, but they all have the same four major properties as mechanical properties, chemical properties, electrical properties, and thermal properties.

Class 200 enameled aluminum flat wire is a kind of winding wire that is coated with polyester-imide composite polyamide-imide insulating varnish on the surface of electrical aluminum wire as the conductor, and baked at high temperature. It has light weight. Easy to wind and relatively low cost, it is widely used in the windings of motors, UPS power supplies, intermittent power supplies and other products.

Product Name:enameled aluminum wire
Type: round and rectangular aluminum wire
Diension:SWG 31 32 33 34 35 36 38
Conductor Material:aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Single-layer Enameled Aluminum Flat Wire Insulated Aluminium Winding Wires are suitable for all “H”, “F” and “B” category applications, such as dry-type transformers, stator winding fractional HP motors, DC magnetic field and armature windings. Wires coated with polyester have good chemical resistance and are compatible with all common impregnating varnishes, including high-temperature modified phenolic polyester and other varnishes that do not contain reactive solvents.

LP industry wholesale enameled wire in china, mainly include the enameled alluminium winding wire and enameled copper wire.
Aluminum /Copper Wire/foils
Dimension:0.2–10.0mm,
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Square: 0.4*0.4mm–8*8mm
Foils:Thickness£º0.2–2.5mm, width:60–1250mm

Super Enameled Aluminium Wire Manufacturers Aluminium Wire Swg Chart, mainly aluminum rectangular wires with various thermal properties. These wires are available in different thermal classes, sizes and models.
Winding wires are state of the art. We achieve this through consistent, high-quality products that can be customized to meet specific needs. We use specially designed insulation coatings to ensure safety and reliability for all applications.

Environmental Friendly Gauge 18 Aluminum Chinese Enamel Wires are a copper or aluminium wire coated with a very thin layer of insulation. It is used in the construction of transformers, inductors, motors, speakers, hard disk head actuators, electromagnets, and other applications that require tight coils of insulated wire.The wire itself is most often fully annealed, electrolytically refined copper. Aluminium magnet wire is sometimes used for large transformers and motors. The insulation is typically made of tough polymer film materials rather than enamel, as the name might suggest.

Enameled Aluminum Wire is used for Transformers, Inductors, Motors, Speakers, Hard disk head actuators, Potentiometers, Electromagnets, etc.
type: flat type and round type
Standard: IEC, NEMA, JIS, GB

Performance comparison of High resistance metal enameled aluminum wire:
(1) Heat resistance
(2) Resistance to solvents, chemicals and varnishes
(3) Resistance to hydrolytic degradation
(4) Stability when combined with insulating materials
(5) Resistance to water and moisture
(6) Ease of use

Product Name:18 gauge enameled aluminum wire
Type: round and rectangular aluminum wire
Round Dimension:18 gauge
Conductor Material:aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

So far, most of transformer, motors and generator manufacturer used the copper magnet wire with its high performance. Nowadays, the enameled aluminum wire uses widely in low-voltage dry type transformer, and motores, which can gradually the copper wire.

High Voltage Winding Wire Transformer Enameled Flat Aluminum Wire 2-22.5mm is a aluminum wire mainly used for windings with contiguous turns. Enamel is in fact a very resistant insulator mechanically, thermally and electrically. In addition to ordinary enamel there is solderable polyurethane enamel which is suitable for very large diameter wires (from 0.16 mm) very difficult to mechanically pickle. Pickling occurs around 400-500 ¡ã C.

Rectangular Aluminum Magnet Wire
Rectangular: A> 0.8–8mm, B> 2-22.5mm
Wire Enamel: UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) ;
thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC)

34 awg High Temperature Colored Enameled Aluminum Magnet Wire is a main type of winding wire. It consists of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. It is the main raw material for products such as motors, electrical appliances and household appliances. Especially in recent years, the electric power industry has achieved sustained and rapid growth. The rapid development of household appliances has brought a broader field to the application of enameled wires.

Aluminum is an excellent electrical conductor, and consequently, most electric motor manufacturers offer it as an option in their motor designs. So why isn¡¯t it used more commonly in motor applications? There are economic reasons and performance reasons that limit aluminum¡¯s usefulness in electric motors.

Aluminum is not only cheaper than copper, but also as an excellent conductor, it has better flexibility than copper, its density is only 1/3 of copper, and the same weight of aluminum conducts electricity twice as much as copper; therefore, aluminum Wire requires a larger wire gauge than copper wire to conduct the same current.
Compared with copper, another advantage of enameled round aluminum wire is that the NEMA standard recognizes aluminum wire as a higher thermal enameled wire. For example, replacing copper wires with aluminum wires, using high-temperature polyester TeresterR@ C966, and composite polyamide-imide topcoat, the thermal level can be increased from 200 to .220. The reason is that during the aging experiment of the enameled copper wire, the catalysis of copper ions promotes the aging of the paint film.

High Thermal Solderable polyester-imide Enameled Aluminum wire refers to the electrical round aluminum rod drawn by a certain specification die on the wire, according to customer requirements, with the required temperature index and compatibility insulating paint , Use mold type or felt type paint to paint multiple corresponding insulating paints. After baking treatment, the insulating paint and the wire form a whole.

Product Name:enameled aluminum wire
Type: flat wire
Round Dimension:0.15Mm-3.2Mm
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Thermal Class: 130-220C
Delivery time: 7-30 Days
Brand Name: LP Magnet Wire
Model Number: Aluminum Flat Wire
Bobbin: 30kg/50kgWooden Spool
Certification: SGS,UL,ISO9001,ISO4001

Raw Materials: aluminum conductor and UEW(QA), PEW(QZ), EIW(QZXY), EI/AIW(QZY) Wire Enamel;
Thermal class: 180(Class H), 200(Class C), 220(Class C+), 240(Class HC),
Standard: IEC, NEMA, JIS, GB.
Spool materials: plastic, wooden.
Dimension: 0.16-9.2mm; 1awg – 34 awg
Application: used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked.
Enamelled aluminum wire has excellent high temperature resistance, mechanical properties, electrical and chemical properties and excellent freeze resistance. It is suitable for long-term work in 200 ¡ã C refrigeration equipment and chemically eroded electrical equipment, dry-type transformers, oil-immersed Transformer and epoxy casting transformers, iron remover, electromagnet and other mechanical and electrical equipment.

Brand Name: LP
Size: 0.8mm-7.0mm
Delivery time: 7-30days
Thermal Class: 130-220C
Certification: UL,ISO,ROHS
Model Number: square magnet wire

Aluminum core magnet wire can be classified according to its basic composition, conductive core and electrical insulation layer. Usually according to the insulating material and manufacturing method used in the electrical insulation layer, it is divided into aluminum core enameled wire, aluminum core wound wire, aluminum core enameled wire and inorganic insulated wire.