Mobile: 0086-18103865695Email: [email protected]
Your position: Home > Media

Secondary Coloring Of Enameled Wire


The secondary coloring of enameled wire is to apply another layer of coloring paint on the insulating layer of the enameled wire to increase the visibility and beauty of the wire. This type of coloring is often used for purposes such as wire identification, circuit differentiation, and decoration.

The following is the general process of secondary coloring of enameled wire:
1. Preparation: First, you need to choose the appropriate stain and color. The tinted paint should have good adhesion, abrasion resistance and chemical resistance to ensure its adhesion and durability on the enameled wire.
2. Clean the surface: Before secondary coloring, it is necessary to ensure that the surface of the enameled wire is clean and remove any dirt, grease or other impurities. This can be achieved by using detergents and appropriate cleaning tools. Proper surface preparation will help improve the adhesion of the paint to the insulation.
3. Apply the tinted paint: Use an appropriate method (such as spraying, dipping or brushing) to evenly apply the tinted paint on the surface of the insulating layer of the enameled wire. Make sure the coating is even and smooth and avoid dripping or wrinkling.
Secondary Coloring Of Enameled Wire.jpg
The choice of paint is also very important: the choice of paint should be based on the specific application needs and requirements. Different applications may require different types of tinted paints, such as environmentally friendly paints, high temperature resistant paints or special purpose paints. In addition, it is important to choose the appropriate color for identification and differentiation of wires.
4. Drying and curing: According to the requirements of the coloring paint used, place the enameled wire in an appropriate environment for drying and curing. This may take some time to ensure that the tint has fully cured and achieved the desired properties.
5. Inspection and testing: After the secondary coloring is completed, inspect and test the enameled wire. Ensure the adhesion, uniformity and durability of the coloring layer meet requirements. Other necessary electrical and physical tests may also be carried out to ensure that the performance of the enameled wire is not affected. In the process of secondary coloring of enameled wire, quality control is crucial. This includes regular inspection and testing of coating thickness, uniformity and adhesion. Employing appropriate quality control measures ensures that the quality of the stains is met and a consistent product is delivered.
Please note that the secondary coloring process for enameled wire may vary depending on application requirements, industry standards and manufacturing processes. In actual practice, it is recommended to refer to applicable standards and relevant guidance and to follow the manufacturer's recommendations and instructions.


[email protected]

Office Add: #4 building One Belt One Road Industry, Jinshui District, Zhengzhou, China.
Factory Add: NO.1, Letian Road, Xindian town, Xinzheng County,Zhengzhou City, Henan Province, China