Iec Standard High Quality Awg 33 Aluminum Enamaled Round Cable Wires

Class 200 enameled aluminum flat wire is a kind of winding wire that is coated with polyester-imide composite polyamide-imide insulating varnish on the surface of electrical aluminum wire as the conductor, and baked at high temperature. It has light weight. Easy to wind and relatively low cost, it is widely used in the windings of motors, UPS power supplies, intermittent power supplies and other products.

Modified Polyester Aluminum Wire Enamelled is a magnet wire made of electric round aluminum rod drawn or extruded into an aluminum wire with a certain specification die, and then coated with multiple layers of modified polyester on the aluminum wire. After the baking treatment, the insulating paint and the wire are formed as a whole.
The coated modified polyester greatly improves its temperature resistance.

Composition of Polyester Enameled Aluminum Winding Wire
Polyester Aluminum Magnet Wire consists of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. It is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by many factors such as the quality of raw materials, process parameters, production equipment, and the environment. Therefore, the quality characteristics of various enameled wires are different, but they all have the same four major properties as mechanical properties, chemical properties, electrical properties, and thermal properties.

Specifications of Polyester Film Wrapped Aluminum magnet Wires Strips
Specifications :
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;:
Has good heat resistance, conditions in 180¡ãC baking 24 hours performance unchanged;
High mechanical strength, good abrasion resistance and flexible;
Excellent withstand voltage properties;
Resistant to moisture absorption, moisture proof;
High breakdown voltage up to 5000~10000V (as required);
Compared to glass-fiber wound wire, lightweight specific gravity, thus reducing purchase cost;

Specialize used in Refrigeration Compressors.
Fluoride resistant enamelled aluminum round wire
Specification Range : 0.06 to 6.00 mm
Material requirements : resistance to R22 and R134a has a special paint, self-lubricating paint, high purity aluminum;
Production standard : GB/T 6109.20 2008;IEC 60317 – and 97;

Model number: Q(ZY/X)-1/180, Q(ZY/X)-2/180 (2EIWN, 1EIWN)
Specification Grid: 0.100-3.000
Heat resistance level: 180 level
Implementation standard: GB/T 6109.12
Performance characteristics: can be used at a working temperature of 180. The product has excellent heat resistance, high thermal shock performance, small surface friction coefficient, and excellent mechanical properties.
Application area:Widely used in motors, electrical appliances, instruments, explosion-proof motors and marine motors with high heat-resistance levels, as well as horizontal windings for color tube deflection. Especially suitable for high-speed winding machine wire coils.

This round enameled wire is made of pure aluminum with insulation,conductors with temperature Class B, F, H, 200˚C, 220˚C are being manufactured by us.
Diameter: 0.16mm to 8.0mm
Standard: IEC60317, NEMA MW 1000

The enamelled round aluminum wire reach to production standards: IEC60317,NEMA MW1000/JIS C3202.
1. 120 degree round enamelled wire for oil-immersed transformer
2. 130, 155, 180 degree round enamelled wire are widely used in all kinds of magnet coil
3. 200 degree round enamelled wire works constantly in high temperature
4. 240 degree round enamelled wire for magnet coils of aviation, military and marine application

The High Breakdown voltage Shaped Aluminum Wire Enameled includes a conductor and a radiation protection layer, the conductor is coated with an insulating layer, the insulating layer is wrapped with a polymethylpentene film, and the polymethylpentene film is wrapped with a corrosion-resistant layer. The anti-corrosion layer is wrapped with an anti-radiation layer, the anti-radiation layer is wrapped with an epoxy-modified silicone resin layer, and the epoxy-modified silicone resin layer is wrapped with an outer layer.

1)Product Name: Aluminum Enameled Wire
2)Diameter:0.5mm/1.0mm/1.5mm
3)Insulation Properties:Polyester imide enameled wire
4)Use:DIY,transformer,electromagnet
5)Work Temperature:-25¡æ~180¡æ
6)Work Humidity:5%~95%RH

Two method to Distinguish High-quality Aluminium Magnet Wire, one is size, the other is looking the appearance.

Product Name:Solderable Self-Bonding Winding Wire
Type: flat or round wire
Round Dimension:0.16-9.2mm
Conductor Material:Aluminum
Application:used for transformers, inductors, motors, generators, dry type transformer, Cast Resin Transformers
Certificate:UL,RoHS
Insulation Materilas:UEW, QZ, QZY, EIW, etc.
Thermal Class:105¡æ, 120¡æ, 140¡æ, 155¡æ, 180¡æ, 200¡æ, 220¡æ, 240¡æ

Class 155 Enameled Aluminum Magnet Wire has high heat resistance, high softening breakdown, solvent resistance, high cut through performance, excellent film flexibility, excellent wear resistance and so on.
American UL certified products. Certificate No.: E345303

LP Industry is a professional magnet wire manufacturer in China, mainly poduce the round aluminum winding wire and flat aluminum enameled wire. Magnet Wires Manufacturing Process includes extruding wire in suitable size, cleaning wire, wire enamel insulating varnish and winding on spool.

Advantage High Temperature 180 200 Degree Power Transformer Winding Aluminum Wire:
1. Compared with the copper enameled wire, enameled aluminum wire is easier to be winded, also there is a solid oxide film on the surface of enameled aluminum wire, which make it has a good insulating effect, a long life.
2. Due to the good insulating effect of aluminum film layer, it¡¯s heat-resistant temperature can be 20 degrees higher than that of the copper wire;
3. The greatest benefit of using aluminum is that it is 1/3 lighter than copper which significantly lower the production costs, secondly it can attach to the solids easily, and thirdly it can also reduce the freight and operation during transportation.

Enameled Aluminum Self Bonding Wire In Hot Air Or Alcohol Type: When the alcohol is added to the product, the wound coils are naturally bonded together and directly formed. Hot air self-adhesive is achieved by blowing hot air on the product coil during the coil winding process to achieve the self-adhesive effect. The temperature of the hot air varies according to different paint film, winding speed, wire diameter and other factors.

he High Thermal Polyurethane Enameled Aluminum wire produced by our company; the thermal grade is 155 and 180. High heat-resistant polyurethane enameled aluminum wire is characterized by direct solderability, good high frequency resistance, easy coloring, and good moisture resistance.

Aluminum core magnet wire can be classified according to its basic composition, conductive core and electrical insulation layer. Usually according to the insulating material and manufacturing method used in the electrical insulation layer, it is divided into aluminum core enameled wire, aluminum core wound wire, aluminum core enameled wire and inorganic insulated wire.

Enameled aluminum wire
Diameter: 0.8-8mm
Temperature Class : 180 , 200 , 220
Standard : IEC 60317-0-2 ,IEC 60317-29 , MW36-A
UL NO : E345303
Bobbin :150kg wooden spool , plastic spool .
Application : Transformer , generator , refrigeration system 

Single-layer Enameled Aluminum Flat Wire Insulated Aluminium Winding Wires are suitable for all “H”, “F” and “B” category applications, such as dry-type transformers, stator winding fractional HP motors, DC magnetic field and armature windings. Wires coated with polyester have good chemical resistance and are compatible with all common impregnating varnishes, including high-temperature modified phenolic polyester and other varnishes that do not contain reactive solvents.

Aluminum is an excellent electrical conductor, and consequently, most electric motor manufacturers offer it as an option in their motor designs. So why isn¡¯t it used more commonly in motor applications? There are economic reasons and performance reasons that limit aluminum¡¯s usefulness in electric motors.

awg to mm electrical enameled aluminum wire is one of the main types of winding wire, which is composed of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. However, it is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of enameled aluminum wire and enameled copper wire are different. The same, but all have four major properties: mechanical properties, chemical properties, electrical properties, and thermal properties.

PT-25 PT-30 2.40mm Aluminum Enameled Transformer Winding Wire means that the one spool of winding wire is about 25kg or 30kg. Conical magnet wire delivery spool is made of plastic materials, used for below 5kg. The tapered design not only maximizes the winding volume of the spool, but also ensures the smooth winding process. But the 25kg and 30kg aluminum enameled transformer winding wire normally uses the wooden rool. All product data may have slight deviations, and the tolerance values ??are within the range of industry standards. The packaging and transportation process of the tapered magnet wire conveyor spool has the characteristics of high strength, strong impact resistance, and good balance.

High Temperature Round Polyimide Enameled Aluminum Wire normally include 200 class C, 220 Class C+, 240 Class HC with good performance double coating. And the enameled aluminum wire is dry type transformers, stator winding fractional and integral H.P motors, D.C Field and Armature windings, Motors for Hermetic grade, Hand tools, Chemicals Industries, Furnaces and high Torque, continuous rated, all Home appliances machine motors, Auto electrical, coil application-varnished or unvarnished.

Tolerance:±1%
Width: 20-1900mm
Thickness (mm): 0.2-3.0
Brand Name: LP Industry
Delivery Time: 46-60 days
Model Number: Aluminum Foils

Flat wire thickness (a): 0.8mm ~8.0mm
Flat wire width (b): 2.0 ~ 25mm
Width (b) /thickness (a) ratio: 1.4 ＜ b/a＜8.0
Enameled flat aluminum wire available size ranges from 1.6-200 mm².

Enameled aluminum wire is a main type of winding wire. It consists of two parts: conductor and insulating layer. After bare wire is annealed and softened, it is baked and baked.
Enamelled aluminum wire has excellent high temperature resistance, mechanical properties, electrical and chemical properties and excellent freeze resistance. It is suitable for long-term work in 200 ¡ã C refrigeration equipment and chemically eroded electrical equipment, dry-type transformers, oil-immersed Transformer and epoxy casting transformers, iron remover, electromagnet and other mechanical and electrical equipment.

Width: 20-1900mm
Place of Origin: Henan, China
Brand Name: LP Industry
Thickness (mm): 0.2-3.0
Delivery Time: 46-60 days
Alloy No.: A1050,A1060, A1070,A1100,A1235,A1245